Product List
Curving Machine
With water cooling system, curving machine obtain quality repeatable bends in steel, stainless, aluminum, titanium and brass. Bending axis-driven by cylinder, feeding axis-manual, rotating axis-manual. Interactive PLC touch screen offers easy access to auto and manual operating modes.
It is used for roof of the dimension (L×W×H): 2.1m×1.3m×1.2m.
Features of Crimping Forming Machine
1. System diagnostics and multiple language capability.
2. Standard clockwise bending direction.
3. Fully hydraulic clamping on clamp die and pressure die.
4. Level-way hydraulic clamping.
5. Direct acting hydraulic pressure die with adjustable speed valve.
6. Maximum 16 sets of program storage, Maximum 16 bends for each program.
7. Programmable material spring back settings for each bend angle.
8. Foot pedal cycle start.
9. One set of tooling for draw bending.
10. Wiper die bracket.
11. 1 Mandrel Rod.
12. Operation and maintenance manual.
13. Tool box with adjusted tools.
14. Electric: As required (3 phase 220V or 380V or 415V)
15. After-sales service: Engineers available to service overseas
16. Certification: CE , ISO
Technical Parameters of Crimping Forming Machine
Raw
material |
Corrugated
steel sheet (235-345Mpa) |
Material
of roller |
45#
steel being quenched treatment |
Material
of crimping device |
Cr12
mould steel being quenched treatment,HRC58-60 |
Material
of shaft |
High
quality 45# steel with heat treatment. Roller grinder milling. |
Crimping
speed |
About
10times /minute |
Power
Requirement |
Main
motor power: 2.2 kW(Depend on final design) |
Hydraulic
station power: 5.5Kw (Depend on final design) |
|
Diameter
of shaft for rollers |
72mm |
Controlling
system |
Mitsubishi
PLC & converter |
Quantity
of feeding rollers |
About
3 stations for main rollers |
Weight
of machine |
About
3000KGS |
Size
of machine |
About
1600mm × 1600mm × 1750mm |